Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-PRERELEASE #16 r244417: Wed Dec 19 20:46:11 JST 2012
    hrs@pool.allbsd.org:/usr/obj/usr/src/sys/POOL amd64
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Xeon(R) CPU           X5650  @ 2.67GHz (2666.81-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206c2  Family = 0x6  Model = 0x2c  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ee3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 25773998080 (24580 MB)
avail memory = 24793300992 (23644 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <090410 APIC1121>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID: 16
 cpu7 (AP): APIC ID: 17
 cpu8 (AP): APIC ID: 18
 cpu9 (AP): APIC ID: 19
 cpu10 (AP): APIC ID: 20
 cpu11 (AP): APIC ID: 21
ioapic1: Changing APIC ID to 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 400, 100 (3) failed
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x8D, should be 0x8A (20110527/tbutils-282)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps0: <LSI SAS2004> port 0xb000-0xb0ff mem 0xfba3c000-0xfba3ffff,0xfba40000-0xfba7ffff irq 30 at device 0.0 on pci3
mps0: Firmware: 07.00.00.00, Driver: 14.00.00.01-fbsd
mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xac00-0xac1f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xa800-0xa81f irq 19 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbeda000-0xfbeda3ff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <Intel 82801JI HDA Controller> mem 0xfbed4000-0xfbed7fff irq 22 at device 27.0 on pci0
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xcc00-0xcc1f mem 0xfbbe0000-0xfbbfffff,0xfbbc0000-0xfbbdffff irq 16 at device 0.0 on pci5
em0: Using an MSI interrupt
em0: Ethernet address: 00:15:17:61:9d:b0
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xc880-0xc89f mem 0xfbb80000-0xfbb9ffff,0xfbb60000-0xfbb7ffff irq 17 at device 0.1 on pci5
em1: Using an MSI interrupt
em1: Ethernet address: 00:15:17:61:9d:b1
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
em2: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xdc00-0xdc1f mem 0xfbce0000-0xfbcfffff,0xfbcdc000-0xfbcdffff irq 16 at device 0.0 on pci6
em2: Using MSIX interrupts with 3 vectors
em2: Ethernet address: 00:25:90:32:7e:b4
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci7: <ACPI PCI bus> on pcib7
em3: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xec00-0xec1f mem 0xfbde0000-0xfbdfffff,0xfbddc000-0xfbddffff irq 17 at device 0.0 on pci7
em3: Using MSIX interrupts with 3 vectors
em3: Ethernet address: 00:25:90:32:7e:b5
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xa480-0xa49f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xa080-0xa09f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbed8000-0xfbed83ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfaffc000-0xfaffffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 on pci8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 19 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
uart1: console (115200,n,8,1)
qpi0: <QPI system bus> on motherboard
pcib9: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib9
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <Winbond Electronics Corp> at usbus1
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
ums0: 3 buttons and [Z] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSA2M160G2GC 2CV102HD> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ses0 at mps0 bus 0 scbus0 target 22 lun 0
ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device 
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 SES Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 10417240 Hz quality 1000
da1 at mps0 bus 0 scbus0 target 11 lun 0
WARNING: WITNESS option enabled, expect reduced performance.
da1: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da0 at mps0 bus 0 scbus0 target 10 lun 0
da0: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da11 at mps0 bus 0 scbus0 target 21 lun 0
da11: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da11: 600.000MB/s transfers
da11: Command Queueing enabled
da11: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da4 at mps0 bus 0 scbus0 target 14 lun 0
da4: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mps0 bus 0 scbus0 target 12 lun 0
da2: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mps0 bus 0 scbus0 target 13 lun 0
da3: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mps0 bus 0 scbus0 target 15 lun 0
da5: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da8 at mps0 bus 0 scbus0 target 18 lun 0
da8: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da8: 600.000MB/s transfers
da8: Command Queueing enabled
da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da6 at mps0 bus 0 scbus0 target 16 lun 0
da6: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da10 at mps0 bus 0 scbus0 target 20 lun 0
da10: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da10: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da9 at mps0 bus 0 scbus0 target 19 lun 0
da9: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da7 at mps0 bus 0 scbus0 target 17 lun 0
da7: <ATA Hitachi HDS72302 A5C0> Fixed Direct Access SCSI-5 device 
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
Trying to mount root from ufs:/dev/mirror/gm0s1a [rw]...
WARNING: / was not properly dismounted
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /var/crash was not properly dismounted
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
em1: link state changed to UP