reading kernel.bin
........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

5332216 bytes read
## Starting application at 0x00900000 ...
 dtbp = 0xc0dd7638
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-BETA1 #12: Fri Jul 27 15:01:04 JST 2012
    hrs@deva.allbsd.org:/usr/obj/arm.arm/usr/src.9/sys/OPENBLOCKS_A6 arm
CPU: Feroceon 88FR131 rev 1 (Marvell core)
  DC enabled IC enabled WB enabled EABT branch prediction enabled
  16KB/32B 4-way Instruction cache
  16KB/32B 4-way write-back-locking-C Data cache
real memory  = 536870912 (512 MB)
avail memory = 517816320 (493 MB)
SOC: Marvell 88F6282 rev A1, TClock 200MHz
simplebus0: <Flattened device tree simple bus> on fdtbus0
ic0: <Marvell Integrated Interrupt Controller> mem 0xf1020200-0xf102023b on simplebus0
timer0: <Marvell CPU Timer> mem 0xf1020300-0xf102032f irq 1 on simplebus0
Event timer "CPUTimer0" frequency 200000000 Hz quality 1000
Timecounter "CPUTimer1" frequency 200000000 Hz quality 1000
gpio0: <Marvell Integrated GPIO Controller> mem 0xf1010100-0xf101011f irq 35,36,37,38,39,40,41 on simplebus0
rtc0: <Marvell Integrated RTC> mem 0xf1010300-0xf1010307 on simplebus0
twsi0: <Marvell Integrated I2C Bus Controller> mem 0xf1011000-0xf101101f irq 43 on simplebus0
iicbus0: <Philips I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
mge0: <Marvell Gigabit Ethernet controller> mem 0xf1072000-0xf1073fff irq 12,13,14,11,46 on simplebus0
mge0: Ethernet address: XX:XX:XX:XX:XX:XX
miibus0: <MII bus> on mge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
uart0: <16550 or compatible> mem 0xf1012000-0xf101201f irq 33 on simplebus0
uart0: console (1066,n,8,1)
uart1: <16550 or compatible> mem 0xf1012100-0xf101211f irq 34 on simplebus0
cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0xf1030000-0xf103ffff irq 22 on simplebus0
device_attach: cesa0 attach returned 6
ehci0: <Marvell Integrated USB 2.0 controller> mem 0xf1050000-0xf1050fff irq 48,19 on simplebus0
usbus0: EHCI version 1.0
usbus0: set host controller mode
usbus0 on ehci0
cryptosoft0: <software crypto> on motherboard
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Marvell> at usbus0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Generic> at usbus0
umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.02, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4101
umass0:0:0:-1: Attached to scbus0
Trying to mount root from ufs:/dev/da0s2 []...
mountroot: waiting for device /dev/da0s2 ...
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 1958MB (4009984 512 byte sectors: 255H 63S/T 249C)
Setting hostuuid: 8a5dbdc6-d121-11e1-babc-f0ad4e014218.
Setting hostid: 0x0a9f6f20.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
Force fsck enabled
Force check /
** /dev/da0s2
** Last Mounted on /mnt
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
7449 files, 88886 used, 864604 free (196 frags, 108051 blocks, 0.0% fragmentation)

***** FILE SYSTEM IS CLEAN *****
Mounting local file systems:.
Setting hostname: openblocks_a6.
mge0: link state changed to UP
Starting Network: lo0 mge0 pflog0 pfsync0 ipfw0 enc0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 
        inet 127.0.0.1 netmask 0xff000000 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
mge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether XX:XX:XX:XX:XX:XX
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
pflog0: flags=0<> metric 0 mtu 33196
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
pfsync0: flags=0<> metric 0 mtu 1500
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        syncpeer: 0.0.0.0 maxupd: 128
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: usbus0.
Starting Network: pflog0.
pflog0: flags=0<> metric 0 mtu 33196
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: pfsync0.
pfsync0: flags=0<> metric 0 mtu 1500
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        syncpeer: 0.0.0.0 maxupd: 128
Starting Network: enc0.
enc0: flags=0<> metric 0 mtu 1536
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting dhclient.
DHCPREQUEST on mge0 to 255.255.255.255 port 67
^CScript /etc/rc.d/devd interrupted
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Waiting 30s for the default route interface: .mge0: watchdog timeout
.^CScript /etc/rc.d/defaultroute interrupted
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Clearing /tmp (X related).
Updating motd:.
Starting ntpd.
Starting sshd.
Starting cron.
Jan  1 00:00:34 openblocks_a6 ntpd_initres[1243]: host name not found: 0.freebsd.pool.ntp.org
Jan  1 00:00:34 openblocks_a6 ntpd_initres[1243]: host name not found: 1.freebsd.pool.ntp.org
Jan  1 00:00:34 openblocks_a6 ntpd_initres[1243]: host name not found: 2.freebsd.pool.ntp.org

Sat Jan  1 00:00:34 EST 2000

FreeBSD/arm (openblocks_a6) (ttyu0)

login: